Best led tailgate light bar. Tailgate light bars are strips of lights that may be installed on the back or top of your vehicle’s body. Their dual-purpose design allows you to have improved vision for all four wheels once they’re in place.
Depending on how much wattage each area has, they might include reverse operation as well, allowing drivers following you to know which way is ahead if necessary.
Moreover because they have all of these characteristics, they’re ideal as general road use warning signals since other cars will see these flashing colored lights from miles away, even in the dark.
The strobing strips are effective visual indicators and good if you enjoy driving off-road vehicles or like adventures. You may also put them on your vehicle so that other drivers can see where to avoid them when passing by.
It’s critical to be able to see the sides of your automobile without relying solely on parking/running lights during these hours, especially while driving at night.
Table of Contents
6 Best led tailgate light bar
|OPT7 60" Redline Triple LED Tailgate
|Nilight TR-04 Truck Tailgate Bar 60"
|Mega Racer Triple Row 60 Inch LED
|MICTUNING 60 inches Triple 504 LEDs
|60" LED Tailgate Light Bar for Trucks
|Nanpoku 48 Inch Tailgate Light Bar
1. OPT7 60″ Redline Triple LED Tailgate Light
Triple LED tailgate light bar with sequential amber turn signals. The most powerful tailgate light bar on the market. 1,200 LEDs provide an attractive and unusual beam of illumination.
With sequential turn signals, you’ll get attention like no other. It’s easy & dependable – simply press n hold while pressing firmly for 25 pounds-rated self-adhesive to do the job.
There are no drills! With a waterproof -20F rated rigid aluminum frame, it’s rust and moisture resistant.
OPT7’S INTENSE BEAM TECHNOLOGY 10X Brighter than a regular LED light bar! OPT7’s Intense Beam Technology produces brilliant, clear light for enhanced visibility and safety.
Traditional dull lamps with yellow light radiation that lacks intensity and depth will no longer be necessary due to our LEDs, which will illuminate all road hazards in absolute clarity from afar, making them undeniably visible to everyone around you.
On the whole bar, this heavy-duty tailgate light bar emits a powerful beam of 12W each unit totaling 120W.
2. Nilight TR-04 Truck Tailgate Bar
The Nilight TR-04 Truck Tailgate Bar 60″ Triple Row 504 is a super bright LED light bar that may be attached to any type of vehicle.
It includes 6 full functions of red running lights, brilliant red brake lights, white reverse lights, sequential amber turn signals, and sequential strobe light.
The tailgate light bar has 504 LEDs in triple rows arranged in a line to make it more visible from a distance.
It has a thin profile of just 1 inch thick while being bright enough to be seen from 500 feet away.
The remote control is used to operate the lights. The included wireless remote offers a range of up to 100 meters, and the functions may be controlled.
The LED light bar has an adjustable bracket that lets you mount it horizontally or vertically on your vehicle. The truck tailgate bar may be installed in minutes using the simple installation instructions from the user manual.
3. Mega Racer Triple Row 60 Inch LED
Our super bright LED truck tailgate light bar comes with 270 pieces of top-of-the-line 2935 SMD diodes chips, ensuring clear rear vision for drivers behind you.
It’s built to last and is very robust! The red brake light, running lights, sequential amber left/right turn signals, white reverse light, and double flashing light are all included.
Allow rear drivers to see you both on and off the road safely by alerting them with this device.
The waterproof IP67 certified silicone and rust-resistant aluminum body ensure that your tailgate light strip will endure any weather condition.
Feel secure knowing that your light bar has been thoroughly tested and certified to the highest standards.
Universal mounting brackets allow for compatibility with virtually any vehicle on the road today. Clip into existing loops of material in trunk liners, backseats, and headliners, as well as truck beds and boat decks.
Get access to a 12V cigarette lighter socket for simple installation. The bright SMD LED strip lights are built with top-notch components to ensure trouble-free performance under all conditions, even in extreme weather.
Only high-quality PCB circuit boards that are both moisture and heat resistant up to 85 degrees Celsius (185 -> 180 degrees Fahrenheit) are used.
4. MICTUNING 60 inches Triple 504 LEDs
ATV MICTUNING 60 inches Triple 504 LEDs Rear Tailgate Light Bar for Truck/SUV/Jeep provides all of the brake, turn signal, running, reverse, and strobe functions.
The Triple-row tailgate light gives out low Red for motion, high Red for braking, amber left/right turning signals, white signing gear changing instructions behind you.
Let everyone following you know what your next move is. The Triple row with 504pcs 2835SMD led chips emits a tremendous beam of light.
It has an IP67 waterproof certification, making it perfect for use in all types of weather. It may be used on cars, trucks, SUVs, and Jeeps without any difficulty.
Installation is simple with a DIY wiring harness or connecting directly to the battery power source via the automobile relay switch.
There are three sets of light bar strips included in the kit they’re already linked to the vehicle’s running lights (parking lights) and turn signals (blinker).
The RV Blackout Cover works by creating a clear view of the rear of your vehicle. It’s simple to install and comes with 3m double-sided tapes. It may be used on both 12V and 24V vehicles, and it is writeable. One-year warranty against any defects.
5. 60″ LED Tailgate Light Bar for Trucks
A vehicle’s lighting system may not be as bright as you would want it to be. A LED light bar is a necessary component of the car’s lighting system.
It warns other drivers and aids in seeing the road ahead in low-light situations.
This LED tailgate light bar provides more illumination than standard tailgate lights, making driving at night considerably safer.
The blacked-out design looks fantastic on any truck, and the sequential turn signals/risk Warnings provide an extra touch of flair.
These lights are built to last they’re encased in a sturdy aluminum frame with silicone around the housing, wiring, and LEDs for protection from the elements. The waterproof lights come in three different sizes to suit most vehicles.
The Daylight LED Light Bar is so easy to install that you can do it yourself in less than an hour. It’s secured to your truck’s back gate with two heavy-duty hooks and loop straps, so no drilling or cutting of your car is necessary.
Because these high-powered 3030 SMD LEDs are more efficient than incandescent bulbs, you won’t have to worry about replacing them as often. Each light bar also has 6 switchbacks for added convenience.
6. Nanpoku 48 Inch Best led tailgate light bar
The Nanpoku 48 inch LED light bar has a triple row of 432 pieces 3528SMD LED chips and a lumens output 300 percent greater than one or double row tailgate lighting bars on automobiles.
It’s designed to fit most trucks and SUVs and takes minutes to install, with no wiring required (wiring harness included).
Low Red light for driving, Bright Red for braking, Amber for left/right turning signals, White for reverse signaling.
And Flash Amber for emergency strobe light is all produced by the light bar. Everyone behind you knows exactly what your next move is.
The NANPOKU 48 inch LED Light Bar is constructed of aluminum, which makes it as light as possible while still providing excellent strength.
It has a very robust design because it employs four quad flat arms. This light bar is an important item for you if you want to make your automobile more eye-catching or alert people on the road.
How are curved light bars measured?
The distance between two walls is measured in inches by taking a tape measure from one wall to the other. It’s crucial to remember that mounting brackets are not included in this measurement. Only the space occupied by the LED bulbs counts toward the total.
Are all light bars the same?
There are several degrees of LEDs, both name-brand and off-brand. A 50″ bar should have 90 or more LEDs with a lumen rating of 27000 or higher.
Inexpensive light bars often employ Epistar LED. These are equivalent to 3 watts but aren’t as bright as Cree, so we consider them 2 watt light sources.