Best Air Filter For 6.7 Cummins. Filters help to protect the life of your engine by keeping harmful particle penetration at bay. The Cummins B series is one of many on- and off-road diesel engines available.
But it’s a straight and linear engine with a piston configuration that correctly separates dirt from dust particles without putting anything inside or Damaging anything when driving at low speeds in traffic.
Without a doubt, the Air Filter For 6 . 7 Cummins is obvious. but you’ll need some discernment to choose the best one.
Filters are least effective in keeping the finest particles at bay. A high-performance aftermarket filter will have a higher efficiency than factory pre-filters because it will contain stronger filtration abilities. If you have a 6.7 Cummins diesel engine.
You’re protected under certain circumstances, but an element is absent with most stock filters, which is unable to retain dirt particles adhered to its mesh.
When operating harshly or under heavy load thus allowing the engine to breathe in additional pollutants into the combustion chamber when running hard or under heavy strain.
Air filters for home use are designed to be used with petrol engines and not diesel motors. Here we listed the top 6 products of the Air Filter For 6.7 Cummins.
Table of Contents
6 Best Air Filter For 6.7 Cummins
|Top||S&B Filters 75-5068 Cold Air Intake||Check Price|
|Top Top||aFe Power Magnum FORCE 54-11872||Check Price|
|Top Top||WIX Filters - 46930 Heavy Duty Air Filter Panel||Check Price|
|Top Top||2007-2012 DODGE RAM 2500 3500 6.7L CUMMINS||Check Price|
|Top Top||Sinister Diesel Cold Air Intake||Check Price|
|Top Top||Fleetguard AF27684 Air Filter Panel||Check Price|
1. S&B Filters 75-5068 Cummins 6.7L
S&B’s Cold Air Intake for the 2013-2018 Dodge Ram Cummins 6.7L is designed to deliver the greatest possible airflow and performance gains overstock.
This air intake system replaces your restrictive factory airbox and filter, resulting in increased horsepower and torque at all RPM levels.
The S&B Ram CAI has an eye-catching black powder-coated heat shield with laser-etched logos, which protects the underhood from high temperatures.
For a simple installation, this direct bolt-on kit comes complete with all the necessary tools and fasteners.
(no other parts required) Bolt-in kit (installation time of 40 minutes or less) Fits 2013+ Ram Cummins diesel trucks with a 5.9L and 6.7L engine (2013 and later versions only).
Increased power and torque (with stock turbo setup) with minimal changes in engine operation. Cylinder Head: No modifications necessary Cylinders, bores, stroke/length ratio, compression ratio are all the same.
Maintains factory air box and filter for maximum engine protection (no loss of performance).
The heatshield is black powder coated with a laser-etched logo for a clean look under the hood It lowers intake temperatures significantly to keep the air charge cool Its reliable for S&B filtration.
This item isn’t compatible with aftermarket intakes. AGU brands are trademarks owned by S&B AGU USA, Inc.
2. aFe Power Magnum FORCE
The aFe Magnum FORCE Diesel Intake System is designed to improve horsepower, torque, and acceleration through better airflow at the rear wheels.
For higher horsepower, torque, and acceleration, this intake system outflows the factory intake by 117%.
The five-layer progressively finer cotton gauze media allows for maximum airflow while defending against abrasive contaminants encountered on the road.
A high-temperature black powder coat finish is featured on the one-piece heat shield, which will endure tough situations.
The air filter is made of 100% polyurethane, which can be cleaned with your preferred type of air filter cleaner or soap and water.
To keep cooler outside air temperatures while protecting the filter element from engine oil splash, all critical air paths are shut off from the engine compartment heat sources.
All required hardware is included in the kit for simple installation. This kit may be installed in approximately one hour using basic hand tools.
This software is ideal for truck enthusiasts. It allows you to increase the quality of your vehicle’s performance by removing all of the typical hot-rod methods, such as remapping and chip tuning.
Improved throttle response, horsepower, and torque Improved performance fits without modification Simple installation of all necessary hardware supplied.
Provides a high-strength powder-coat finish with an impact-resistant surface Limited warranty of one year Allows manufacturers lifetime core warranty.
3. WIX Filters Air Filter Panel
The WIX 46930 is a heavy-duty air filter panel that fits most tractor and lawnmower engines. It has an outside diameter of 6 inches and a height of 10 1/4 inches.
One air filter panel is included in this kit. A pre-oiled foam element with excellent filtration for your engine’s intake system is also included with the WIX 46930.
WIX filters are designed for tractors, lawnmowers, snowblowers, ATVs, and other outdoor power equipment. Best Air Filter For 6.7 Cummins.
The WIX 46930 is a 10 1/4-inch tall heavy-duty air filter panel with an outside diameter of 6 inches.
This kit includes one WIX air filter (46930) with a pre-oiled foam element (58720). The WIX air filter is created using woven cotton gauze and high-efficiency synthetic media.
WIX filters are designed to capture 97 percent of dirt particles with a diameter of 10 microns or larger, including fine dust particles.
This makes the WIX 46930 an excellent choice for equipment such as lawnmowers and tractors that require high-quality filtration. The pre-oiled foam component provides great filtering for your engine’s intake system.
4. 2007-2012 DODGE RAM
DODGE RAM is a trustworthy firm that prides itself on delivering high-quality air filters.
One of the simplest and most effective methods to improve your truck’s engine performance is to change its cold air filter intake.
This 6.7 Cummins cold air intake has an exceptional 99.50 percent efficiency rate.
This differs from other cold air intake filters in that it is compactly built to prevent engine lights from flashing. So, for at least 12 000 kilometers, travel without any problems.
You may use the gate arm if you remove the dam from it. Assume you’re heading to a more polluted location. In that situation, you may simply reattach the dam and use single inlets.
The DODGE RAM 6.7 cold air intake is powder painted in a stunning, intimidating blue for a unique, clean appearance beneath the hood.
It’s easy to install, maintain, and clean up after itself. As a result, it can endure temperatures as high as 400° F (200° C).
5. Sinister Diesel Cold Air Intake Cummins 6.7L
Oversized Long Lasting Reusable Cotton Oiled Filter Media – Polished and Powder Coated in our Signature Sinister Blue.
You would be happy to know that your Cold Air Intake comes with a ‘piece of mind’ replacement guarantee.
If you are not 100% pleased with your purchase, we will buy our Cold Air Intake back from you, free of charge.
We believe in the Sinister Diesel air intake. It improves performance and throttle response while also boosting fuel efficiency.
Our cold air intakes deliver the performance you want with less effort, as they are simple to install and fit as well as they appear.
This Cold Air Intake System offers a fantastic way to improve airflow and maximize power gains at the same time, utilizing a reusable cotton gauze filter media that protects against dirt and dust particles being ingested.
You’ll never think it’s possible to have a clean engine bay again! This Cold Air Intake is sinister.
6. Fleetguard AF27684 for 6.7-liter Cummins
The 53034051AC is a large air filter with an extended service life that protects your engine against dirt, dust, and particles.
This is the same Cummins Filtration Air Filter that was used in the 2007.5 to 2017 Dodge Ram trucks equipped with a 6.7-liter diesel engine.
The Fleetguard Replacement Air Filter has dependability and reliability that surpasses OEM standards and customer requirements.
The TheFleetguard name, which has been associated with high-quality filtration products since 1963, is one of the most well-known filter brand names in the United States and worldwide.
Fleetguard/Cummins Filtration is a world leader in the design, manufacture, and supply of filtration systems for engines, cabs, and transmissions.
Cummins Filtration is the firm that created your truck’s unique filter. We have a lot of expertise in air filtering and can help you choose the appropriate filter for your car.
Cummins Filtration has over 100 years of combined expertise in developing filters to keep engines clean from dirt, soot, water, and other harmful substances.
We design and engineer our products in the United States with world-class engineering teams focused on the research and development of automobile aftermarket filtration solutions.
Every day, we produce more than 1 million replacement air filters to ensure that you get the best performance every time you drive down the road with our Fleetguard Replacement Air Filter.
1. How many fuel filters on 2012 6.7 Cummins?
There are two filters on the 2012 6.7 Cummins: one under the truck’s bed and another under the engine hood.
2. What does 6.7 Cummins maintenance cost?
The cost of keeping a 6.7 Cummins in good operating condition is very low, about $300 if you don’t make a lot of mistakes. Hiring an expert hand may be somewhat more expensive.
Best Air Filter For 6.7 Cummins. If you are still deciding on which air filter for 6.7 Cummins to purchase, here are some pros and cons of the top 6 filters in our list that may help with your decision-making process.
At the end of this article, we will also review a few other considerations when it comes to choosing an air filter for Cummins engines in general so be sure not to miss them.